30 May 2014
28 May 2014
Last week I was reviewing Jasmine Tea. This week it's all about Oohlong Tea! Isn't that just the best name for a type of tea?!
Provided by the lovely Zoe of The Kettle Shed for me to share my thoughts with you all, Oohlong arrived in this gorgeous tin, bursting with the sweet smell of pure oohlong. On the front of the tin are instructions on how much to use per cup, how hot your water should be and how long you should let it infuse for. I love this bit of detail. Not only does it help get the right flavour but it shows how much the tea is valued and respected! It's not just something to fling in a cup, it should be brewed properly!
Now, I have to confess, I've tried Oolong before and I haven't been a huge fan but I got the kettle on, my best china out and started brewing the tea in my little teapot, with an infuser.
27 May 2014
Hello and welcome to another guest post tutorial!
This fantastic bookbinding tutorial is great for a weekend project or for a craft party! It has been put together by the very talented hands of Vicki, who has just moved over from the UK to Melbourne, Australia, taking her awesome Etsy shop, By Me For You, with her too! Vicki also has a facebook page, with updates on which markets she'll be at with her quirky accessories and also news about the latest designs she's working on. I'm loving those magnetic bookmarks!
So, lets hand the reigns over to Vicki to find out how to make a 4-hole Japanese book!
– Take your stack of paper and make sure all the sheets are neatly piled and placed on top of the thin card in one of the corners.
– Take your ruler and place it on top of the paper up against the paper edge. Draw a line on the card, along the two edges.
– Do this again on a different corner of the card (fig 1).
– Cut them out. You now have the front and back of your notebook (fig 2).
Fig 1 Fig 2
|Fig 3, 4 and 5|
|Fig 6 and 7|
– Fold in all the edges starting with the two long edges first and then the short edges. This will enable you to check how the paper will fold and if you need to cut the edges a little more (fig 8).
– Glue the edges again, long edges first (fig 9) and then the short edges (fig 10).
Note: always glue outwards from the edge of the card to the edge of the paper and only use a very thin layer of glue.
– The back cover of the book is now done so put to one side (fig 11).
|Fig 8, 9, 10 and 11.|
The front cover has a ‘hinge’ opening so requires a bit more work.
– Take the front cover card, from the right short edge mark a 2 cm point and 2.5 cm point (fig 12).
– Draw a line for both these points down the page, making a thin gutter (fig 13).
– Cut along the gutter but DO NOT discard this piece. You will now be left with 3 pieces of card (fig 14).
|Fig 12, 13 and 14|
|Fig 15, 16 and 17|
- To make sure the hinge folds well, first fold the smaller piece of card inwards, making a very light crease (fig 18).
– Then fold inwards along the larger piece, making a light crease (fig 19).
– When you turn it over you can see a light indent where the gutter will be (fig 20).
– Now repeat Step 3.
|Fig 18, 19 and 20|
– Take a spare piece of paper the exact length of the short edge of the book. Mark a point 1 cm from the edge (fig 21) and draw a line down.
– Now measure in 1 cm along the line and mark an ‘X’ (fig 22), this will be your first hole. Do this for the other end too and this will be your last hole.
– Measure the length from the first and second marks and make two more marks in between, making sure all 4 marks are equally spaced. For the size of my book this works out at a 5 cm gap in between each mark (fig 23)
Step 7: We now need to secure the book while we sew.
- Make sure you have the back and front covers neatly sandwiching the stack of inside papers. Remember that your front cover needs to have the hinge on the right hand edge of the book and that this is the edge we will be sewing.
– Take the non hinged edge and a piece of spare paper and fold over the edge of the book (fig 24) (this will protect the nice paper from any damage by the clips), and clip this in place (fig 25).
– On the hinged edge take your piece of paper with the markings on from Step 6, make sure this is
on top of the front cover, and place a piece of paper at the back of the book and clip into place (fig 26).
|Fig 24, 25 and 26|
I suggest you do this on a cutting mat or block of wood. If you struggle to pierce through the whole book you can use a mallet and gently tap the pricker through.
-You now have 4 holes through the book, which we will sew through.
Step 10 The sewing:
This is actually really simple but looks complicated. I have drawn diagrams which should be easier to follow.
|Fig 29 and Fig 30|
in. Split the book roughly in the middle, take the
needle and thread and go up through the inside,
through the other side, pull through, leaving a
small ‘tail’ of thread hanging out the book.
the bottom of the same hole (fig 30A). Take the
thread all the way through.
– Fig 31: From nº 2 go across to nº3 through the
top and out the bottom.
– Fig 34: From nº 4 go through the top of nº 3 and out the bottom, then go along to nº 2 and up
through to the top.
– Fig 35: From nº 2 go through the top of nº 1 and out the bottom, then go over the top edge and back in through nº 1.
through nº 1 again. Then go across to nº 2 and
where you began and come out the book (fig 38). Cut the thread again leaving a small ‘tail’
Wow, what a fantastic tutorial! Thanks so much, Vicki! I can't wait to give this a go.
I hope you're all going to try this out. Why not send me your pictures of your finished books and I'll pop them up on the blog!
Happy paper crafting everyone!